Viking House Season 1: Episode Guide & Ratings

Part 1 focuses on cutting the cedar logs for the foundations of the viking house. The foundations are only going to be two cedar logs high. The hand tools we use are an axe, saw, hammer, and wrecking bar. We begin by using an axe and saw to create saddle notches to make the log cabin foundation. We use 10 logs overall for the foundation of the viking shelter.

In Part 2 we build a timber frame bushcraft style. We use a bit and brace and make wood dowels to build the a frame timber roof structure. The foundations of the viking shelter consists of cedar logs which we notched using log cabin notches (saddle notches) and we made the walls two cedar logs high. We burned the ends of the a frame and dug a deep hole down into the clay layer.

Part 3 focuses on building a viking long pit, or stone fire pit, for the inside of the viking house. We dig the foundations of the pit using a shovel and our hands. We dig through the soil layer and then dig down to the clay layer. We store the clay for later use. We then head into the forest to find some large stones to line the fire pit.

Part 4 focuses on using the axe, auger and draw knife to build a viking bench, saw horse and spit for the stone clay fire pit ready to roast meat over the fire. Now that the cedar log foundations are in place, and the timber frame has been built, we are able to focus on making viking furniture such as the saw horse and bench using traditional woodworking techniques and hand tools.

Part 5 focuses on using hand tools to build the timber frame roof using cedar logs. We also use the axe, saw, hammer and auger to build a bushcraft viking bed for the viking shelter. Now that the saw horse is built, it is much easier for us to saw wood efficiently. We cook steak over the fire and eat good food in the viking camp. The rafters on the house are now up and secured to the ridge pole.

Part 6 focuses on building the bark roof for the viking house. The hand tools we use in for this project is a viking axe, hammer, auger, saw, drawknife and a few others. We use bark from cedar logs for the shingles for the roof of the house. We tile the bark and use tacks and nails to secure it to the rafters and timber frame. We had to use a wood ladder to get up onto the roof of the house.